Despues de una semana leyendo varios post etc comentando que no era posible conseguir hacer funcionar Beryl con una Ati X1600, he conseguido hacerlo….
Para aquellos que quieran intentarlo les doy los pasos que he seguido…
1.-Instalar los drivers de Ati, ya que los drivers libres no tienen soporte para estas tarjetas, para ello mirar el proceso aqui:
2.- Desactivar AIGLX ya que el driver de Ati no da soporte para él, para ello en la seccion “ServerFlags” pondremos:
Option “AIGLX” “off”
3.- En /etc/sysconfig/displaymanager debe aparecernos esto: DISPLAYMANAGER_XSERVER=”Xgl”
4.- Reiniciamos el servidor X con CTRL+ALT+Backspace. 6.- Al entrar de nuevo en gnome abrimos unaconsola y ejecutamos: beryl-manager
Copio aqui el contenido del fichero /etc/xorg.conf por si a alguna persona le sirve.
# /…/
# SaX generated X11 config file
# Created on: 2007-04-28T18:19:24+0200.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#
Section “Files”
FontPath “/usr/share/fonts/misc:unscaled”
FontPath “/usr/share/fonts/local”
FontPath “/usr/share/fonts/75dpi:unscaled”
FontPath “/usr/share/fonts/100dpi:unscaled”
FontPath “/usr/share/fonts/Type1″
FontPath “/usr/share/fonts/URW”
FontPath “/usr/share/fonts/Speedo”
FontPath “/usr/share/fonts/PEX”
FontPath “/usr/share/fonts/cyrillic”
FontPath “/usr/share/fonts/latin2/misc:unscaled”
FontPath “/usr/share/fonts/latin2/75dpi:unscaled”
FontPath “/usr/share/fonts/latin2/100dpi:unscaled”
FontPath “/usr/share/fonts/latin2/Type1″
FontPath “/usr/share/fonts/latin7/75dpi:unscaled”
FontPath “/usr/share/fonts/baekmuk:unscaled”
FontPath “/usr/share/fonts/japanese:unscaled”
FontPath “/usr/share/fonts/kwintv”
FontPath “/usr/share/fonts/truetype”
FontPath “/usr/share/fonts/uni:unscaled”
FontPath “/usr/share/fonts/CID”
FontPath “/usr/share/fonts/ucs/misc:unscaled”
FontPath “/usr/share/fonts/ucs/75dpi:unscaled”
FontPath “/usr/share/fonts/ucs/100dpi:unscaled”
FontPath “/usr/share/fonts/hellas/misc:unscaled”
FontPath “/usr/share/fonts/hellas/75dpi:unscaled”
FontPath “/usr/share/fonts/hellas/100dpi:unscaled”
FontPath “/usr/share/fonts/hellas/Type1″
FontPath “/usr/share/fonts/misc/sgi:unscaled”
FontPath “/usr/share/fonts/xtest”
FontPath “/opt/kde3/share/fonts”
FontPath “unix/:7100″
InputDevices “/dev/gpmdata”
InputDevices “/dev/input/mice”
EndSection
Section “ServerFlags”
Option “AllowMouseOpenFail” “on”
Option “IgnoreABI” “on”
Option “AIGLX” “off”
EndSection
Section “Module”
Load “dbe”
Load “type1″
Load “freetype”
Load “extmod”
Load “glx”
Load “v4l”
Load “dri”
EndSection
Section “InputDevice”
Driver “kbd”
Identifier “Keyboard[0]“
Option “Protocol” “Standard”
Option “XkbLayout” “es”
Option “XkbModel” “pc102″
Option “XkbRules” “xfree86″
EndSection
Section “InputDevice”
Driver “mouse”
Identifier “Mouse[1]“
Option “Buttons” “12″
Option “Device” “/dev/input/mice”
Option “Name” “Logitech USB Receiver”
Option “Protocol” “explorerps/2″
Option “Vendor” “Sysp”
Option “ZAxisMapping” “4 5″
EndSection
Section “Monitor”
Option “CalcAlgorithm” “XServerPool”
DisplaySize 408 255
HorizSync 30-83
Identifier “Monitor[0]“
ModelName “ACER AL1916W”
Option “DPMS”
VendorName “ACR”
VertRefresh 43-75
UseModes “Modes[0]“
EndSection
Section “Modes”
Identifier “Modes[0]“
EndSection
Section “Screen”
DefaultDepth 24
SubSection “Display”
Depth 15
Modes “1440×900″ “1280×1024″ “1280×960″ “1280×800″ “1152×864″ “1280×768″ “1024×768″ “1280×600″ “1024×600″ “800×600″ “768×576″ “640×480″
EndSubSection
SubSection “Display”
Depth 16
Modes “1440×900″ “1280×1024″ “1280×960″ “1280×800″ “1152×864″ “1280×768″ “1024×768″ “1280×600″ “1024×600″ “800×600″ “768×576″ “640×480″
EndSubSection
SubSection “Display”
Depth 24
Modes “1440×900″ “1280×1024″ “1280×960″ “1280×800″ “1152×864″ “1280×768″ “1024×768″ “1280×600″ “1024×600″ “800×600″ “768×576″ “640×480″
EndSubSection
SubSection “Display”
Depth 8
Modes “1440×900″ “1280×1024″ “1280×960″ “1280×800″ “1152×864″ “1280×768″ “1024×768″ “1280×600″ “1024×600″ “800×600″ “768×576″ “640×480″
EndSubSection
Device “Device[0]“
Identifier “Screen[0]“
Monitor “Monitor[0]“
EndSection
Section “Device”
BoardName “Framebuffer Graphics”
BusID “1:0:0″
Driver “fglrx”
Identifier “Device[0]“
Option “FSAADisableGamma” “no”
Option “Capabilities” “0×00000000″
Option “ScreenOverlap” “0″
Option “FSAAMSPosX4″ “0.000000″
Option “FSAAMSPosY1″ “0.000000″
Option “mtrr” “off”
Option “FSAAMSPosX5″ “0.000000″
Option “FSAAMSPosY2″ “0.000000″
Option “FSAAScale” “1″
Option “ForceGenericCPU” “no”
Option “FSAAMSPosY3″ “0.000000″
Option “GammaCorrectionI” “0×00000000″
Option “FSAAMSPosX0″ “0.000000″
Option “FSAAMSPosY4″ “0.000000″
Option “no_accel” “no”
Option “FSAACustomizeMSPos” “no”
Option “FSAAMSPosY5″ “0.000000″
Option “UseFastTLS” “0″
Option “BlockSignalsOnLock” “on”
Option “FSAAEnable” “no”
Option “GammaCorrectionII” “0×00000000″
Option “VideoOverlay” “on”
Option “no_dri” “no”
Option “FSAAMSPosX1″ “0.000000″
Option “PseudoColorVisuals” “off”
Option “StereoSyncEnable” “1″
Option “UseInternalAGPGART” “no”
Option “FSAADisableGamma” “no”
Option “CapabilitiesEx” “0×00000000″
Option “Capabilities” “0×00000000″
Option “FSAAMSPosX0″ “0.000000″
Option “FSAAMSPosX1″ “0.000000″
Option “OpenGLOverlay” “off”
Option “FSAAMSPosX2″ “0.000000″
Option “FSAAMSPosX2″ “0.000000″
Option “Stereo” “off”
Option “FSAAMSPosX3″ “0.000000″
Option “CenterMode” “off”
Option “ScreenOverlap” “0″
Option “FSAAMSPosY0″ “0.000000″
Option “FSAAMSPosY1″ “0.000000″
Option “mtrr” “off”
Option “FSAAMSPosX4″ “0.000000″
Option “ForceGenericCPU” “no”
Option “FSAAMSPosX5″ “0.000000″
Option “OpenGLOverlay” “off”
Option “FSAAMSPosY2″ “0.000000″
Option “FSAAScale” “1″
Option “FSAAMSPosY3″ “0.000000″
Option “GammaCorrectionI” “0×00000000″
Option “no_accel” “no”
Option “FSAAMSPosY4″ “0.000000″
Option “UseFastTLS” “0″
Option “FSAAMSPosY5″ “0.000000″
Option “FSAACustomizeMSPos” “no”
Option “FSAAEnable” “no”
Option “Stereo” “off”
Option “BlockSignalsOnLock” “on”
Option “GammaCorrectionII” “0×00000000″
Option “KernelModuleParm” “locked-userpages=0″
Option “no_dri” “no”
Option “VideoOverlay” “on”
Option “UseInternalAGPGART” “no”
Option “PseudoColorVisuals” “off”
Option “StereoSyncEnable” “1″
Option “CenterMode” “off”
Option “FSAAMSPosX3″ “0.000000″
Option “FSAAMSPosY0″ “0.000000″
VendorName “VESA”
EndSection
Section “ServerLayout”
Identifier “Layout[all]“
InputDevice “Keyboard[0]” “CoreKeyboard”
InputDevice “Mouse[1]” “CorePointer”
Option “Clone” “off”
Option “Xinerama” “off”
Screen “Screen[0]“
EndSection
Section “DRI”
Group “video”
Mode 0660
EndSection
Section “Extensions”
Option “DAMAGE” “false”
Option “Composite” “false”
EndSection
Para ver una medida de velocidad en FPS en consola ejecutamos: $glxgears
Como nota diré que a mi me suele sacar entre 3000-4000 FPS.
